Nokia 7110 ========== Assembled by Balazs Nagy Marcin Wiacek Jens Bennfors Michael Hund Jay Bertrand Gabriele Zappi Markus Plail Ralf Thelen Walek ... and other members of gnokii mailing list and authors of some WWW pages. The data provided is for information purposes only. Some of the frames might be hazardous to your phone. Be careful!!! We do not take any responsibility or liability for damages, etc. .. note:: this information isn't (and can't be) complete. If you know anything about features not listed here or you noticed a bug in this list, please notify us via e-mail. Thank you. Document describing frames used in GSM Nokia 6210 and derivatives (7110) Correct format is FBUS version 2/Infrared/MBUS version 2 (see nokia.txt for protocol details): List:: 0x00: Connect to NBS port ? r Set ringtone {+0x7c,0x01,0x00,0x0d,0x06[6],0x78,ringtone packed according to SM2.0} Seems not to work in MBUS! 0x01: Communication Status ? r Call msg { 0x0002 } ? r Call in progress { 0x0003, seqnr } ? r Remote end hang up { 0x0004, seqnr, ?, error (like in netmon in 39) } ? r incoming call alert { 0x0005, seqnr, numlen, "number", namelen, "name" } ? r answered call { 0x0007, seqnr } ? r terminated call { 0x0009, seqnr } ? r call msg { 0x000a, seqnr } Note: in 6210 4.27 all msg from 0x01 seems to be unavailable 0x02: SMS handling s Send SMS message { 0x0001, 0x02, 0x00 (SEND REQUEST), ... } r Message sent { 0x0002 } r Send failed { 0x0003, ?, ?, error (like in netmon in 65)} s Incoming SMS info on { 0x000d, 0x00, 0x00, 0x02} note: no info about Delivery Reports r Incoming SMS info onOK{ 0x000e } note: no info about Delivery Reports r Incoming SMS infoonerr{ 0x000f, error } where error: 0x0c - no PIN r SMS message received { 0x0011, ...... } (whole message) s Set CellBroadcast { 0x0020, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01 } for enable cell broadcast ? 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } for disable cell broadcast ? r Set CellBroadcast OK { 0x0021, 0x01 } r Read CellBroadcast { 0x0023, ?, ?, ?, channel, ?, message... } ? s Set SMS center { 0x0030, 0x64, priority, checksum?, format, validity[2], {DefaultRecipient no.}[12], {SMScenter no.}[12], {SMSC name}, 0x00} where tel.no.[12]: {len, type, {number(BCD)}} type: 0x81: normal 0x91: + (international) 0xd0: alphanumeric format: 0x00: text 0x22: fax 0x24: voice 0x25: ERMES 0x26: paging 0x31: X.400 0x32: email validity: 0x000b: 1 hour 0x0047: 6 hours 0x00a7: 24 hours 0x00a9: 72 hours 0x00ad: 1 week 0x00ff: max.time r Set SMS center OK { 0x0031 } r Set SMS center error { 0x0032, reason } s Get SMS center { 0x0033, 0x64, priority } r SMS center received { 0x0034, priority, checksum?, type, validity[2], {DefaultRecipient no.}[12], {SMScenter no.}[12], {SMSC name}, 0x00 } where priority, checksum, type, validity, tel.no.[12]: see 0x02/0x0030 r SMS center error recv { 0x0035, reason } s?? { 0x0074} r?? { 0x0075, 0xFF, 0x11, 0x98} s?? { 0x008C} r?? { 0x008D, 0x00} 0x03: Phonebook functions s Get memory status { 0x0103, 0x02, memory type } where: memory type - see 0x03/0x0107 r Get memory status { 0x0104, 0x00, xL, 0x00[2], y1H, y1L, 0x10, 0x00[2], z?, ymaxH, ymaxL, y2H, y2L, 0x0d?, xH?, 0x00[2]? } where y1: location (lowermost) y2: no. of locations ymax: maximum location no. s Read memory { 0x0107, 0x01, 0x01, 0x00, 0x01, xH, xL, yH, yL, 0x00, 0x00} where x: memory type 0x01: (256) Dialled numbers 0x02: (512) Missed calls 0x03: (768) Received calls 0x05: (500) telephone phonebook 0x06: (160) SIM phonebook 0x07: (10/0) 0x08: (1/0) 0x09: (4) voice mailbox 0x0e: (10) speed dials 0x10: (5) caller groups y: location r Read memory error { 0x0108, 0x00, 0x01, code,0x00, 0x00, z, error} where code==0x0f error: 0x34 - phonebook location not found 0x3b - speed dial not assigned r Read memory OK { 0x0108, 0x00, 0x01, code,0x00, 0x00, z, xH, xL, yH, yL, 0x00, 0x00, 0x00, no.of blocks, { block } * } where code: != 0x0f y: location z: generic block size block: {id, 0, 0, blocksize, block no., {contents}, 0x00} id: 0x04 pointer to another memory location { 0xff?, yH, yL, xL,0x00[3] } 0x07 name {len, (unicode)}, 0x08 email 0x09 postal 0x0a note {len, (unicode)} 0x0b number {type, 0x00[3], len, (unicode)} 0x0c ringtone {ringtone no., 0, 0} 0x13 date for a called list (DC, RC, etc.) 0x1b caller group graphic {width, height, 0, 0 {bitmap}} 0x1c caller group graphic on? {(1: yes, 0: no), 0, 0} 0x1e caller group number {number, 0, 0} type: 0x0a: General, 0x03: Mobile (office ?), 0x06: Work, 0x04: Fax, 0x02: Home (mobile ?) s Set mem location { 0x010b, 0x00, 0x01, 0x01, 0x00, 0x00, z, xH, xL, yH, yL, 0x00, 0x00, 0x00, no.of blocks, { block }[no.of blocks] } r Set mem location { 0x010c, 0?, 1?, code, 0?, 0?, z?, 0?, 0?, yH, yL, xL } where code: 0x3d - wrong entry type 0x3e - too many entries s Delete mem location { 0x010f, 0x00, 0x01, 0x04, 0x00, 0x00, 0x0c, 0x01, 0xff, xH, xL, yH, yL, 0x00, 0x00} where x: location y: memory type r Delete mem location { 0x0110, 0x00, 0x00 } 0x06: Calling line restriction/Call forwarding etc r Get call divert { 0x0001, 0x02, x, 0x00, divtype, 0x02, calltype, y, z, 0x0b, number, 0x00...0x00, timeout (byte 45) } s Set call divert { 0x0001, 0x03, 0x00, divtype, calltype, 0x01, number(packed like in SMS), 0x00 ... 0x00, length of number (byte 29), 0x00 ... 0x00, timeout (byte 52), 0x00, 0x00, 0x00} NOTE: msglen=0x37 where timeout: 0x00: not set ? 0x05: 5 second 0x0a: 10 second 0x0f: 15 second 0x14: 20 second 0x19: 25 second 0x1e: 30 second where divtype: 0x02: all diverts for all call types ? Found only, when deactivate all diverts for all call types (with call type 0x00) 0x15: all calls 0x43: when busy 0x3d: when not answered 0x3e: if not reached calltype: 0x00: all calls (data, voice, fax) 0x0b: voice calls 0x0d: fax calla 0x19: data calls s Deactivate calldiverts{ 0x0001, 0x04, 0x00, divtype, calltype, 0x00 } where divtype, calltype: see above r Deactivate calldiverts{ 0x0002, 0x04, 0x00, divtype, 0x02, calltype, data } s Get call diverts { 0x0001, 0x05, 0x00, divtype, calltype, 0x00 } where divtype, calltype: see above r Get call diverts ok { 0x0002, 0x05, 0x00, divtype, 0x02, calltype, data } where divtype, calltype: see above data: { 0x01, 0x00 } - isn't active { 0x02, 0x01, number(packed like in SMS), 0x00, 0x00..., timeout } r Get prepaid(?) info { 0x0005, ?,?,?,length,message(packed like in 7bit SMS)} r Call diverts active { 0x0006, ??? } 0x0a: Network status s get used network { 0x0070 } r get used network { 0x0071, available,?,?,length,netstatus,netsel,cellIDH, cellIDL,lacH,lacL,MCC+MNC[3],{Opstr}, 4?, len, xlen(78), ylen(21), 0, {bitmap} } where {Opstr}: namelen, {operator name(unicode)} len: {xlen, ylen, 0, {bitmap} + 2 {bitmap}: bitmaplen, 0, 0, {OTA bitmap} available: 0x02 if the logo following is valid, 0x01 for no operator logo following s get network status { 0x0081 } r get network status { 0x0082, network%, 0x14? } s set operator logo { 0x01a3 0x01, oplogo?, MCC+MNC[3], 0?,4?,len, xlen(78),ylen(21), 0 (frames?), {bitmap}*?, 0x00(padding) } where len, {bitmap}: see 0x0a/0x0071 r set operator logo OK { 0x01a4 } s clear operator logo { 0x00af, x} where x==0 to 4 r clear operator logo { 0x00bf} 0x13: Calendar notes s Add meeting note { 0x0001, body like in subtype 0x001a...} r Add meeting note { 0x0002, location (2 bytes), status (2 bytes)} s Add call note { 0x0003, body like in subtype 0x001a...} r Add call note { 0x0004, location (2 bytes), status (2 bytes)} s Add birthday note { 0x0005, location (2 bytes), entry type, 0x00, year of birth(2 bytes), Month, Day, 0x00, 0x00, alarm (4 bytes), alarm type, length, text (Unicode)} r Add birthday note { 0x0006, location (2 bytes), status (2 bytes)} s Add reminder note { 0x0007, body like in subtype 0x001a...} r Add reminder note { 0x0008, location (2 bytes), status (2 bytes)} s Delete calendar note { 0x000b, location (2 bytes) } r Delete calendar note { 0x000c, location (2 bytes), ?, ?, ?, ? } s Get calendar note { 0x0019, location (2 bytes) } r Calendar note recvd { 0x001a, location (2 bytes), entry type, 0x00, year (2 bytes), Month, Day, block} where: entry type - 0x01 - Meeting, 0x02 - Call, 0x04 - Birthday, 0x08 - Reminder block: for Meeting:{hour,minute,alarm (two bytes),recurrence (two bytes),len,0x00,string(unicode)} where alarm=Number of minutes before the time of the meeting that the alarm should be triggered: For meetings with "No alarm"=0xFFFF (-1). For "On time"=0x0000 half an hour=0x001E, and so on. Recurrence=in hours, between future occurrences of this meeting. If there is no repeat, this value is 0x0000. The special value 0xffff means 1 Year! for Call:{Hour,Minute,Alarm (as above),Recurrence (as above),namelen,numberlen, name(unicode),number(unicode)} for Reminder:{Recurrence (as above),len,0x00,string(unicode)} for Birthday:{byte1,byte2,alarm(4 bytes),yearofbirth,alarmtype,len,string(unicode)} byte1 and byte2 may vary (???). Usually are 0x00 both (but not always) In Birthday, the Year in the common part, usually contains a strange year. So, don't consider it as Year of note, neither year of BirthDay (for Year of Birthday use the value described below). where alarm=32-bit integer that is the number of seconds between the desired alarm time and 11:59:58pm on the birthday.For "No Alarm", the value is 0x0000FFFF (65535). YearOfBirth=used instead of the one in the common part of the entry (see above) but only when reading birthday entries. For storing entries, this field does not exist. AlarmType: 0x00 - Tone, 0x01 - Silent ? s??? { 0x0021 } ? r??? { 0x0022, 0x5A, 0x00 } ? s??? { 0x0025 } ? r??? { 0x0026, 0x04, 0x00 } ? s { 0x0029 } ? r { 0x002A, 0x04, 0x00 } s Get first free pos { 0x0031 } r Get first free pos { 0x0032, location (2bytes) } s Get notes info { 0x003a, 0xFF, 0xFE} r Get notes info { 0x003b, how many notes used (2 bytes), 0x01, 0x07, { two bytes with location for each note} *} ? s Get calendar note?? { 0x003E, location (2 bytes) } ? r Get calendar note?? { 0x003F, location (2bytes), ... } 0x14: s Get Picture Image { 0x0007, location, number[2 bytes], 0x00, 0x64 } r Get Picture Image { 0x0008, 0x07, location, number[2 bytes], 0x07, ??[38], width, height, lenH, lenL, {bitmap}, 0x00, 0x00, text len, text(coded like in SMS)...} r Get SMS failed { 0x0009, 0x02 }, s Get SMS status { 0x0036, 0x64 } r Get SMS Status { 0x0037, 0x05/0x03, 0x01, 0x00, 0x00, a (2 octets), b (2 octets), c (2 octets), d (2 octets), e (2 octets), 0x00 where: a - according to P.Kot: Number of locations in "fixed" memory. These are all Templates entries in my Nokias 6210 (NPE-3 (c) NMP V05.36 14-11-01, NPE-3 (c) NMP V05.27 01-08-01). I can't remove any of Templates entries in my phone. Marcin Wiącek: Rather not ! I don't agree. I have 0x00, 0x0f and 10 templates and 3 SMS and 10 Picture Images. b - Number of used messages in phone memory. These are messages manually moved from the other folders. Picture messages are saved here. c - Number of unread messages in phone memory. Probably only smart msssages. d - Number of used messages in SIM memory. These are either received messages or saved into Outbox/Inbox. Note that you *can't* save message into this memory using 'Move' option. Picture messages are not here. e - Number of unread messages in SIM memory s Set Picture Image { 0x0050, 0x07, location, number[2 bytes], 0x07, ??[38], width, height, lenH, lenL, {bitmap}, 0x00, 0x00, text len, text(coded like in SMS)...} std. size: 72x28 r Set Picture Image { 0x0051, location, number[2 bytes], 0x07 } s Set SMS name { 0x0083,folder,location(2bytes),name(Unicode),0x00 , 0x00} r Set SMS name { 0x0084,folder,0x00, 0x00, name (Unicode),0x00,0x00} s List Picture Images { 0x0096, location, 0x0f, 0x07 } where location: LM tries with 0x09, 0x11, 0x19, 0x21, 0x29, 0x31, 0x39, 0x41, 0x49 Returned value with 0x21 r List Picture Images { 0x0097, number of pictures[2 bytes], number1[2 bytes], number2[2 bytes], ..., } s Write SMS to folder { 0x0104, status, folder ID, location(2 bytes), 0x02, 0x01, SMS stuff ... } r Write SMS to folder { 0x0105, folder ID, location(2 bytes), 0x00 } r Write SMS to folder { 0x0106, 0x02 (write failed errorcode ?) } s Get SMS from folder { 0x0107, folderID, location(2 bytes), 0x01, 0x65, 0x01} where: folderID - see 0x14/0x017B r Get SMS from folder { 0x0108, status, folderID, 0x00, location, type, sender number,...} where: status=0x01 - reveived/read 0x03 - received/unread 0x05 - stored/sent 0x07 - stored/not sent where: folderID - see 0x14/0x017B where: type=0x00 - received SMS 0x01 - delivery report 0x02 - stored SMS 0x07 - picture message s Delete SMS message { 0x010a, folderID, location(2 bytes), 0x01 } r Delete SMS { 0x010b } s Get folder status { 0x016b, folderID, 0x0F, 0x01} where: folderID - see 0x14/0x017B r Get folder status { 0x016c, number of entries (2 bytes), entry1number (2 bytes), entry2number(2 bytes), ....} s Get folder names { 0x017A, 0x00, 0x00} r Get folder names { 0x017B, number of strings, folderID, name1, 0x00, folderID, name2, 0x00, name3, 0x00,...} where: folderID=0x08 - Inbox 0x10 - Outbox 0x18 - Archive 0x20 - Templates 0x29 - first "My folders" 0x31 - second "My folders" 0x39 - third -"- and so on 0x17: s Get Battery info { 0x0002 } r Get Battery info { 0x0003, 0x0b, batt%, 0x14?, 0x01? } 0x19: Phone clock & alarm These frames are like the same frames subtypes in 0x11 in 6110 s set date and time { 0x0060, 1,1,7,yearh,yearl,month,mday,hour,min,0x00 } r date and time set { 0x0061 } s get date and time { 0x0062 } r date and time recvd { 0x0063,date_set?,time_set?,?,?,yearh,yearl,month,mday,hour,min,second } where: date_set & time_set==0x01 - set 0x00 - not set, ?,?,yearh,yearl,month,mday,hour,min,second not available in frame s set alarm { 0x006b, 1,32,3,0x02(on-off),hour,min,0x00 } r alarm set { 0x006c } s get alarm { 0x006d } r alarm received { 0x006e,?,?,?,?,alrm(==2:on),hour,min } These are new (?) ? s ?? { 0x0083, id } ? r ?? { 0x0084, 0x01, 0x40, 0x03, id, 0x00, 0x00 } ? r ?? { 0x0084, 0x01, 0x40, 0x03, id, 0x00, 0x01 } ? r ?? { 0x0084, 0x01, 0x40, 0x03, id, 0x01, 0x00 } where: id=0x27,0x2a,0x32,0x28,0x40 0x1b: s Get IMEI { 0x0001 } r Get IMEI { 0x0002, {IMEI(ASCII)}, 0x00 } s get HW&SW version { 0x0003, 0x01, 0x32 } r get HW&SW version { 0x0004, "V " "firmware\n" "firmware date\n" "model\n" "(c) NMP." 0x00 0xff[14] } 0x1f: s ??? { 0x0010, 0x02, 0x00, 0xff, 0xff } r ??? { 0x0011, length, 0x00, {block}[length] } where block: { unicode letter[2], 0x0000, 0x00, 0x55, ??, ?? } s Set ringtone { 0x011f, 0x00, location, 0x00, name(Unicode), ringtone(format the same to 0x40/0x019e and 0x40/0x01a0) } where: location: 0x87 to 0x8b on N6210 0x74 to ... on N7110 s Get ringtone { 0x0122, 0x00, location} r Get ringtone { 0x0123, 0x00, location, name(Unicode), 0x00,...,0x00, 0x02,0xFC,0x09(ringtone contenst)} r Get ringtone error { 0x0124, ...} 0x39: s get profile feature { 0x0101, 0x01, 0x01, 0x01, number1, number2} where number1: from 0x00 to 0x07 (for each profile ?) number2: 0x00 - 0x09, 0x0A, 0x16 - 0x19, 0x1a - 0x1f, 0x20 - 0x29, 0x2a - 0x2c, 0xff where 0x09: keypad tones 0x02: incoming call alert 0x03: ringtone number 0x04: ringing volume 0x05: message alert tone 0x06: vibra 0x07: warning tones 0x08: caller groups alert for 0x09: automatic answer 0xff: name r get profile feature { 0x0102, 0x01, 0x02, number2, block...} for number2==0xff: (Profile Name) block: 0x01, length, name(Unicode), 0x00, 0x00 for number2==0x00: (Keypad Tones) block: 0x01, 0x01, 0x01, Type, 0x01 where: Type : 0x00 = Off 0x01 to 0x03 = Level1 .. Level3 for number2==0x02: (Incoming Call Alert) block: 0x01, 0x01, 0x01, Type, 0x01 where: Type : 0x00 = Ringing 0x01 = Ascending 0x02 = Ring Once 0x03 = Beep Once 0x05 = Off for number2==0x03: (Ringtone Number) block: 0x01, 0x01, 0x01, Number, 0x01 where: Number : 0x40 to 0x62 - gives number of factory ringtone. The number of menu is obtained by doing (Number - 0x3f); where: Number : 0x89 to 0x8d - gives number of uploaded ringtone. The number of menu is obtained by doing (Number - 0x65),while the uploaded ringtone number is obtained by doing (Number - 0x88). for number2==0x04: (Ringing volume) block: 0x01, 0x??, 0x??, Volume, 0x01 where: Volume : 0 = Level1 .. to 4 = Level5 for number2==0x05: (Message Alert Tone) block: 0x01, 0x01, 0x??, Type, 0x01 where: Type : 0x00 = Off 0x01 = Standard 0x02 = Special 0x03 = Beep Once 0x04 = Ascending for number2==0x06: (Vibration) block: 0x01, 0x??, 0x??, Switch, 0x01 where: Switch : 0 = Off, 1 = On for number2==0x07: (Warning Tones) block: 0x01, 0x??, 0x??, Switch, 0x01 where: Switch : 0 = Off, 1 = On for number2==0x08: (Caller groups Alert for) block: 0x01, 0x??, 0x??, Callers, 0x01 where: Callers : 0xff = All calls alert (Read below *) 0x01 = Family 0x02 = VIP 0x04 = Friends 0x08 = Colleagues 0x10 = Others All logical OR among groups are valid, so if you select from one phone's profile alert for Friends and Colleagues, a 0x0c will return (because 0x04 OR 0x08 = 0x0c). (*) If Callers==0xff, means "Alert for All calls". Then, in this case, you don't need to read other groups selection. for number2==0x09: (Automatic answer) block: 0x01, 0x??, 0x??, Switch, 0x01 where: Switch : 0 = Off, 1 = On N.B. This feature is valid for Handsfree and Headset profiles only! s ??? { 0x0101, 0x04, 0x01, 0x01, 0xff, 0x03 } r ??? { 0x0102, 0x01, 0x02, 0x03, 0x01, 0x01, 0x01, 0x85/0x087 } s ? { 0x0105} r ? { 0x0106, 0x01, 0x04} 0x3f: WAP s Enable WAP frames { 0x0000} r Enable WAP frames { 0x0002, 0x01} s ?? { 0x0003} r ?? { 0x0004} s Get WAP bookmark { 0x0006, 0x00, location} where location: 0 - 14 r Get WAP bookmark { 0x0007, 0x00, name_len, name(unicode), url_len, url(unicode), 0x01,0x80,0x00[7]} r Get WAP bookmark err { 0x0008, error } where error: 0x00(?)invalid position 0x01 user inside "Bookmarks" menu. Must leave it 0x02 invalid/too high/empty location s Set WAP bookmark { 0x0009, 0xff, 0xff, name_len, name(unicode), url_len, url(unicode), 0x01,0x80,0x00[7] } Note: bookmark is added to the first free location. r Set WAP bookmark OK {+0x01, 0x36, 0x0a, block } where block: 0x0a, location_of_just_written_bookmark(?), 0x00, next_free_location(?) r Set WAP bookmark err {+0x01, 0x36, 0x0b, error } where error: 0x04 - memory is full 0x01 - we are in the bookmark menu 0x00 - unknown reason for now ;( ? s Delete WAP bookmark { 0x000c, 0x00, location } where: location = 0-14 ? r Delete WAR bookmark OK{ 0x000d } ? r Delete WAPbookmark err{ 0x000e, 0x02 } s ?? { 0x000F} r ?? { 0x0010, 0x00} s Get WAP settings 1 { 0x0015, location} where location: 0x00 - 0x05 r Get WAP settings 1 OK { 0x0016, title length, title (Unicode), URL length, URL(Unicode),con_type, ???[6 bytes],location, ???[5 bytes],security,...} where: con_type: 0x00 - temporary 0x01 - continuous location: when use "Get WAP settings 2 frame", must give it security: 0x00 = no, 0x01 = yes r Get WAP settings 1 err{ 0x0017, error } where error: 0x01 user inside "Settings" menu. Must leave it 0x02 invalid/too high/empty location s Get WAP settings 2 { 0x001b, location} where location: 0x00 - 0x1d (you get it in "Get WAP settings 1" frame) r Get WAP settings 2 OK { 0x001c, 0x01, type, frame...} where type : 0x00 - SMS bearer frame: service_num_len, service_num (Unicode), server_num_len, server_num(Unicode) 0x01 - data bearer frame: auth, call_type, call_speed, ?, IP len, IP (Unicode), dialup len, dialup (Unicode), user len, user (Unicode), password len, password (Unicode) where auth: 0x00 - normal, 0x01 - secure call_type: 0x00 - analogue, 0x01 - ISDN call_speed: 0x00 - 9600, 0x01 - 14400 0x02 - USSD bearer frame: type, service number len/IP len,service num (Unicode)/IP (Unicode),service code len, service code (Unicode) where type: 0x01 - service number, 0x00 - IP r Get WAP settings 2 err{ 0x001d,error} where: error=0x05 0x40: Security commands ? s ???(N6150) { 0x08, 0x00 } ? r ???(N6150) { 0x08 } s Enable extended cmds { 0x64, cmd } where cmd: 0x00: off 0x01: on 0x03: reset (doesn't ask for PIN again) 0x04: reset (PIN is requested) In 5110 makes reset without PIN 0x06: CONTACT SERVICE!!! Don't try it! s Reset phone settings { 0x65, value, 0x00 } where value: 0x08 - reset UI (User Interface) settings 0x38 - reset UI, SCM and call counters 0x40 - reset test 36 in netmonitor r Reset phone settings { 0x65, 0x00 } s Get IMEI { 0x66 } r Get IMEI { 0x66, 0x01, IMEI, 0x00} s (ACD Readings)?(N6150 { 0x68 } r (ACD Readings)?(N6150 { 0x68, ... } s Get Product Profile Settings { 0x6a} r Get Product Profile Settings { 0x6a, 4bytes with Product Profile Settings } s Set Product Profile Settings { 0x6b, 4bytes with Product Profile Settings } r Set Product Profile Settings OK ? { 0x6b } s Get code { 0x6e, code } where code: see 0x08/0x0004 (no allowed code !) r Get code { 0x6e, code, allowed, allowed? (sec code (text)) } where code: see 0x08/0x0004 allowed: 0: no 1: yes ? s ???? { 0x74, 0x01, 0x01, 0x0e } ? r ???? { 0x74 } s Call commands { 0x7c, block } where where: command, (values) command: 0x01 values: number(ASCII), 0x00 - makes voice call command: 0x02 - answer call command: 0x03 - release call r Call commands { 0x7c, command } s Netmonitor { 0x7e, field } where: field: 00: next F0: reset F1: off F2: field test menus F3: developer menus s Get simlock info { 0x8a, 0x00} r Get simlock info { 0x8a, 0x00, 0x01, lockstype, locksclosed, 0x00, 0x00, locksinfo(lock1,4,2,3), counter1,counter2,counter4,counter4,0x00 } where: lockstype: bit1,bit2,bit3,bit4 - if set, selected lock is user lock locksclosed: bit1,bit2,bit3,bit4 - if set, selected lock is closed counter1 - counter4: counters for locks s Buzzer pitch { 0x8f, volume, hzLO, hzHI } if volume and hz is 0, it's off r Buzzer pitch { 0x8f} s ACD Readings ? { 0x91, parameter?(0x02,0x03,0x04,0x05,0x07) } r ACD Readings ? { 0x91, parameter?, value? } ? s ???(N6150) { 0x98, 0x00 } ? r ???(N6150) { 0x98, 0x00, 0x04 } s Get bin ringtone { 0x9e, location } where: location=0,1,etc. r Get bin ringtone { 0x9e, location, error, contents... } where location=0,1,etc. error=0x0a, ringtone NOT available 0x00, OK s Set bin ringtone { 0xa0, location, 0x00, contenst... } where: location=0,1,etc. r Set bin ringtone { 0xa0, location, error } where location=0,1,etc. error=0x0a, ringtone NOT set 0x00, ringtone set OK ? r Get MSid { 0xb5, 0x01, 0x2f, msid, 0x25 } s Get info about phone { 0xc8, 0x01 } r Get info about phone { 0xc8, 0x01, 0x00, "V ", "firmware", 0x0a, "firmware date", 0x0a, "model", 0x0a, "(c) NMP.", 0x00 } s Get MCU SW Checksum { 0xc8, 0x02 } r Get MCU SW Checksum { 0xc8, 0x02, 0x00, checksum (4 bytes),0x00 } s DPS External SW { 0xc7, 0x03 } r DSP External SW { 0xc7, 0x03, 0x00, string,0x00 } s Get HW { 0xc8, 0x05 } r Get HW { 0xc8, 0x05, 0x00, HW version (4 bytes), 0x00 } s Get "Made" Date { 0xc8, 0x05 } r Get "Made" Date { 0xc8, 0x05, 0x00, date(4 bytes), 0x00 } s Get DSP Internal SW { 0xc8, 0x09 } r Get DSP Internal SW { 0xc8, 0x09, 0x00, version (1 bytes), 0x00 } s Get PCI version { 0xc8, 0x0b } r Get PCI version { 0xc8, 0x0b, 0x00, version, 0x00 } s Get system ASIC { 0xc8, 0x0c } r Get system ASIC { 0xc8, 0x0c, 0x00, string, 0x00 } s Get COBBA { 0xc8, 0x0d } r Get COBBA { 0xc8, 0x0d, 0x00, string, 0x00 } s Get PLUSSA { 0xc8, 0x0e } r Get PLUSSA { 0xc8, 0x0e, available, 0x00 } where available: 0x01: not available s Get CCONT { 0xc8, 0x0f } r Get CCONT { 0xc8, 0x0f, available, 0x00 } where available: 0x01: not available s Get PPM version { 0xc8, 0x10 } r Get PPM version { 0xc8, 0x10, 0x00, "V ", "firmware", 0x0a, "firmware date", 0x0a, "model", 0x0a, "(c) NMP.", 0x00 } s Get PPM info { 0xc8, 0x12 } r Get PPM info { 0xc8, 0x12, 0x00, PPM version ("B", "C", etc.), 0x00 } s Set HW version { 0xc9, 0x05, version, 0x00 } s Get Product Code { 0xca, 0x01 } r Get Product Code { 0xca, 0x01, 0x00, number, 0x00 } s Get Order Number { 0xca, 0x02 } r Get Order Number { 0xca, 0x02, 0x00, string, 0x00 } s Get Prod.Ser.Number { 0xca, 0x03 } r Get Prod.Ser.Number { 0xca, 0x03, 0x00, number, 0x00 } s Get Basic Prod.Code { 0xca, 0x04 } r Get Basic Prod.Code { 0xca, 0x04, 0x00, number, 0x00 } s Set Product Code { 0xcb, 0x01, product code, 0x00 } s Set Order Number { 0xcb, 0x02, number, 0x00 } s Set Prod.Ser.Number { 0xcb, 0x03, number, 0x00 } s Get (original ?)IMEI { 0xcc, 0x01 } r Get (original ?)IMEI { 0xcc, 0x01, IMEI, 0x00 } s Get Manufacture Month { 0xcc, 0x02 } r Get Manufacture Month { 0xcc, 0x02, 0x00, string, 0x00 } s Get Purchare date { 0xcc, 0x04 } r Get Purchare date { 0xcc, 0x04, 0x00, string, 0x00 } s Set "Made" date { 0xcd, 0x02, string, 0x00 } s Make "all" phone tests{ 0xce,0x1d,0xfe,0x23,0x00,0x00} s Make one phone test { 0xce,0x1d,num1,num2,num3,num4} Where num1-num4: 0x02,0x00,0x00,0x00; 0x04,0x00,0x00,0x00; 0x08,0x00,0x00,0x00; 0x10,0x00,0x00,0x00; 0x20,0x00,0x00,0x00; 0x40,0x00,0x00,0x00; 0x80,0x00,0x00,0x00; 0x00,0x01,0x00,0x00; 0x00,0x02,0x00,0x00; 0x00,0x04,0x00,0x00; - "Power off" No test for "Security data" 0x00,0x10,0x00,0x00; 0x00,0x20,0x00,0x00; 0x00,0x40,0x00,0x00; 0x00,0x80,0x00,0x00; 0x00,0x00,0x01,0x00; .... 0x00,0x00,0x10,0x00; s Result of phone tests { 0xcf } r Result of phone tests { 0xcf, number of tests, results of next tests } ? s ??? { 0xd1 } ? r ???(N5110) { 0xd1, 0x00, 0x1d, 0x00, 0x01, 0x08, 0x00 } s LCD Test { 0xd3, value } where value: 0x03, 0x02 - 1'st test 0x03, 0x01 - 2'nd test 0x02, 0x03 - clears screen s ACD Readings(N6150)? { 0xd4, 0x02, 0x00, 0x02, 0x00, 0x0e, 0x01} r ACD Readings(N6150)? { 0xd4, 0x02, 0x00, 0x02, 0x00, 0x0e, 0x01, ?} r Function of { 0xff, 0x8c } 0x40 msgtype not supported ? 0x78: s Status confirm { 0x0201, 0x03 } r Incoming call seq1 { 0x0102 0x0e 0x03 } r Incoming call seq2 { 0x0102 0x7e 0x01 } 0x79: s CarKit enable { 0x0201 0x01 0x62 0x00 } r CarKit enabled { 0x0201 0x02 0x06 0x00 "V " {version} "\nHFU" 0x00 } 0x7a: settings r Set setting { 0x01eb, number, 0x00 } s Set setting { 0x01ec, number, contents } where for number: 0x02 (startup text) : 0x00, text (Unicode) 0x15 (startup logo) : 0x00, 0x00, 0x00, 0x04, 0xc0, 0x02, 0x00, height, 0xc0, 0x03, 0x00, width, 0xc0, 0x04, 0x03, 0x00, {bitmap} } where width, height, {bitmap}: see 0x7a/0x01ed 0x15 s Get setting { 0x01ee, number} where number: 0x01 - 0x1e 0x02: startup text 0x15: startup logo 0x1c: security code r Get setting { 0x01ed,number, 0x00, contents} where for number: 0x02 (startup text) : 0x00, text (Unicode) 0x15 (startup logo) : 0x00, 0x00, 0x00, 0x04, 0xc0, 0x02, 0x00, height, 0xc0, 0x03, 0x00, width, 0xc0, 0x04, 0x03, 0x00, {bitmap} } where height: 60 (0x3c) or 65 width: 96 (0x60) {bitmap}: like other bitmaps but pixels placed vertically. 0x1c (security code): {code(ascii)}, 0x00 0x7f: Acknowledge(FBUS/IRDA){+type, seq } Acknowledge(MBUS)... 0xd0: s Power on message seq1 {+04 } r Power on message seq1 {+05 } 0xd1: s Get HW&SW version { 0x0003, 0x00 } 0xd2: r Get HW&SW version { 0x0003 "V " "firmware\n" "firmware date\n" "model\n" "(c) NMP." } 0xf4: Power on message seq 2